Port Forwarding the Topcom Xplorer870+ Router for Everquest

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Topcom Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Topcom > Xplorer870+ > Everquest

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Topcom Xplorer870+ router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

Don't Skip This Step!

Login to the Topcom Xplorer870+ Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Topcom Xplorer870+ Router IP Address

It's ok if you don't know your Topcom Xplorer870+ router's internal IP address. You can find it by doing one of the following:

Login To The Topcom Xplorer870+ Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Topcom Xplorer870+ Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Topcom Xplorer870+ router. By default the IP address should be set to

Topcom Xplorer870+ Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Topcom Xplorer870+ Router Username is: admin

The Default Topcom Xplorer870+ Router Password is: 12345678

Click the Ok button to log in to your Topcom Xplorer870+ router.

Default Usernames and Passwords for other Topcom Routers

Please visit our Default Topcom Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Topcom Xplorer870+ router username and password, use our How to Reset a Router Password guide to set your Topcom Xplorer870+ router back to its factory settings.

How to Port Forward Everquest on the Topcom Xplorer870+

Having trouble forwarding ports on the Topcom Xplorer870+?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Topcom Xplorer870+ router to save you time and hassle.

Topcom Xplorer870+ Router Port Forwarding Screenshots

Now that you are logged in to your Topcom Xplorer870+ router you should see the following:

Topcom Xplorer870+ Screenshot 2

Click the Inbound Servers link near the left of the page.

Topcom Xplorer870+ Screenshot 3

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Everquest requires you to forward the AppFullPortsListTag ports. Go ahead and enter the settings shown above into the Inbound Servers Configuration menu and then click Add.

You should see another page of settings that need to be entered into one of the blank lines on your routers Inbound Servers Configuration page. Go ahead and enter those settings and then click Add.

When you're finished, click Save Configuration near the left of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for Everquest on the Topcom Xplorer870+ you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Topcom Xplorer870+ Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Topcom Router Screenshots. We have the Internets largest collection of Router Screenshots.