To setup port forwarding on the Tornado tornado840 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Tornado tornado840 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Tornado tornado840 router. By default the IP address should be set to 192.168.123.254.
You should see a box prompting you for your Tornado tornado840 password. Enter the password now.
Click the Ok button to log in to your Tornado tornado840 router.
Please visit our Default Tornado Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Tornado tornado840 router password, use our How to Reset a Router Password guide to set your Tornado tornado840 router back to its factory settings.
Now that you are logged in to your Tornado tornado840 router you should see the following:
Click the Forwarding Rules link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. PS3 PlayStation Home requires you to forward the following ports: 3478-3480,8080. Go ahead and enter the settings shown above into the Virtual Server menu.
|ID||Service Ports||Server IP||Data Type||Enable||Use Rule#|
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for PS3 PlayStation Home on the Tornado tornado840 you should test to see if your ports are forwarded correctly.