To setup port forwarding on the Toshiba WRC-1000 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Toshiba WRC-1000 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Toshiba WRC-1000 router. By default the IP address should be set to 192.168.10.1.
Click the Ok button to log in to your Toshiba WRC-1000 router.
Please visit our Default Toshiba Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Toshiba WRC-1000 router username and password, use our How to Reset a Router Password guide to set your Toshiba WRC-1000 router back to its factory settings.
Now that you are logged in to your Toshiba WRC-1000 router you should see the following:
Click the Forwarding link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. CQPhone requires you to forward the 24960-24962 ports. Go ahead and enter the settings shown above into the Forwarding Configuration menu and then click Apply.
|TCP Port Forwards||Start||End||IP Address||Start||End|
|UDP Port Forwards||Start||End||IP Address||Start||End|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for CQPhone on the Toshiba WRC-1000 you should test to see if your ports are forwarded correctly.