To setup port forwarding on the Trendnet TEW-632BRP router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Trendnet TEW-632BRP router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Trendnet TEW-632BRP router. By default the IP address should be set to 192.168.10.1.
Click the Ok button to log in to your Trendnet TEW-632BRP router.
Please visit our Default Trendnet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Trendnet TEW-632BRP router username and password, use our How to Reset a Router Password guide to set your Trendnet TEW-632BRP router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Trendnet TEW-632BRP router to save you time and hassle.
Now that you are logged in to your Trendnet TEW-632BRP router you should see the following:
Click the Access button near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Neptune AquaController requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click add.
And that is it! You are done!
Now that you have forwarded ports for Neptune AquaController on the Trendnet TEW-632BRP you should test to see if your ports are forwarded correctly.