Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Trendnet TW100-BRF1141 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Trendnet TW100-BRF1141 router. By default the IP address should be set to 192.168.0.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Trendnet TW100-BRF1141 router.
Please visit our Default Trendnet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Trendnet TW100-BRF1141 router username and password, use our How to Reset a Router Password guide to set your Trendnet TW100-BRF1141 router back to its factory settings.
Now that you are logged in to your Trendnet TW100-BRF1141 router you should see the following:
Click the Internet link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Servers.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GeoVision RemoteView requires you to forward the 3550 ports. Go ahead and enter the settings shown above into the Virtual Servers menu and then click Add as new Server.
|PC (Server):||My PC is not listed|
|Internal Port No.||External Port No.|
And that is it! You are done!
Now that you have forwarded ports for GeoVision RemoteView on the Trendnet TW100-BRF1141 you should test to see if your ports are forwarded correctly.