To setup port forwarding on the US Robotics USR5463 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your US Robotics USR5463 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your US Robotics USR5463 router. By default the IP address should be set to 192.168.2.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your US Robotics USR5463 router.
Please visit our Default US Robotics Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your US Robotics USR5463 router username and password, use our How to Reset a Router Password guide to set your US Robotics USR5463 router back to its factory settings.
Now that you are logged in to your US Robotics USR5463 router you should see the following:
Click the Advanced Settings link near the left of the page.
You should now see a new menu. In this new menu, click NAT.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Dream Match Tennis requires you to forward the 2319 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.
|No.||LAN IP Address||Protocol Type||LAN
And that is it! You are done!
Now that you have forwarded ports for Dream Match Tennis on the US Robotics USR5463 you should test to see if your ports are forwarded correctly.