Port Forwarding the US Robotics USR5463 Router for mIRC Auth-IdentD


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View US Robotics Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > US Robotics > USR5463 > mIRC Auth-IdentD

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the US Robotics USR5463 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.2. <-- Don't Skip This Step!

Login to the US Robotics USR5463 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your US Robotics USR5463 Router IP Address

It's ok if you don't know your US Robotics USR5463 router's internal IP address. You can find it by doing one of the following:

Login To The US Robotics USR5463 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

US Robotics USR5463 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your US Robotics USR5463 router. By default the IP address should be set to 192.168.2.1.

US Robotics USR5463 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default US Robotics USR5463 Router Username is: blank

The Default US Robotics USR5463 Router Password is: blank


Click the Ok button to log in to your US Robotics USR5463 router.


Default Usernames and Passwords for other US Robotics Routers

Please visit our Default US Robotics Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your US Robotics USR5463 router username and password, use our How to Reset a Router Password guide to set your US Robotics USR5463 router back to its factory settings.


How to Port Forward mIRC Auth-IdentD on the US Robotics USR5463


Having trouble forwarding ports on the US Robotics USR5463?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your US Robotics USR5463 router to save you time and hassle.

US Robotics USR5463 Router Port Forwarding Screenshots

Now that you are logged in to your US Robotics USR5463 router you should see the following:

US Robotics USR5463 Screenshot 2

Click the Advanced Settings link near the left of the page.

You should now see a new menu. In this new menu, click NAT.

You should now see a new menu. In this new menu, click Virtual Server.

US Robotics USR5463 Screenshot 3

Forward Ports 113 on the US Robotics USR5463

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. mIRC Auth-IdentD requires you to forward the 113 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add.

No. LAN IP Address Protocol Type LAN
Port
Public
Port
Enable  
1 192.168.2.

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for mIRC Auth-IdentD on the US Robotics USR5463 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

US Robotics USR5463 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our US Robotics Router Screenshots. We have the Internets largest collection of Router Screenshots.