Port Forwarding the US Robotics USR9114 Router for QSee QSD9004CM-250


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View US Robotics Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > US Robotics > USR9114 > QSee QSD9004CM-250

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the US Robotics USR9114 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the US Robotics USR9114 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your US Robotics USR9114 Router IP Address

It's ok if you don't know your US Robotics USR9114 router's internal IP address. You can find it by doing one of the following:

Login To The US Robotics USR9114 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

US Robotics USR9114 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your US Robotics USR9114 router. By default the IP address should be set to 10.0.0.1.

US Robotics USR9114 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default US Robotics USR9114 Router Username is: admin

The Default US Robotics USR9114 Router Password is: admin


Click the OK button to log in to your US Robotics USR9114 router.


Default Usernames and Passwords for other US Robotics Routers

Please visit our Default US Robotics Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your US Robotics USR9114 router username and password, use our How to Reset a Router Password guide to set your US Robotics USR9114 router back to its factory settings.


How to Port Forward QSee QSD9004CM-250 on the US Robotics USR9114


Having trouble forwarding ports on the US Robotics USR9114?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your US Robotics USR9114 router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.


Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.


Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

US Robotics USR9114 Router Port Forwarding Screenshots

Now that you are logged in to your US Robotics USR9114 router you should see the following:

US Robotics USR9114 Screenshot 2

Click the Security link near the top of the page.

You should now see a new menu. In this new menu, click Virtual Servers.

US Robotics USR9114 Screenshot 3

Click the Add button near the center of the page.

US Robotics USR9114 Screenshot 4

Forward Ports 80 on the US Robotics USR9114

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSD9004CM-250 requires you to forward the following ports: 80,9000. Go ahead and enter the settings shown above into the Add Virtual Servers menu.

Select a Service:  
Custom Server:  
Server IP Address:  
 
External Port Start External Port End Protocol Internal Port Start Internal Port End


Forward Ports 9000 on the US Robotics USR9114

You should see another page of settings that need to be entered into one of the blank lines on your routers Add Virtual Servers page. Go ahead and enter those settings now.

Select a Service:  
Custom Server:  
Server IP Address:  
 
External Port Start External Port End Protocol Internal Port Start Internal Port End

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QSD9004CM-250 on the US Robotics USR9114 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

US Robotics USR9114 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our US Robotics Router Screenshots. We have the Internets largest collection of Router Screenshots.