To setup port forwarding on the Ubee DDW3610 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Ubee DDW3610 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Ubee DDW3610 router. By default the IP address should be set to 192.168.0.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Ubee DDW3610 router.
Please visit our Default Ubee Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Ubee DDW3610 router username and password, use our How to Reset a Router Password guide to set your Ubee DDW3610 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Ubee DDW3610 router to save you time and hassle.
Reverend which is the client side of MatchWatch needs to have 5600 through 5699 using the TCP protocol forwarded. You also
need to forward port 5500 through 5599 TCP for Reverend to talk with MatchWatch.
If you have a second computer that will be playing Reverend, you should forward port 12205 UDP to that computer and enter 12205 in the front of Reverend.
For more information on MOHAA MatchWatch please visit mohworld.org.
Now that you are logged in to your Ubee DDW3610 router you should see the following:
Click the Gateway link near the top of the page.
The menu on the left should change. In this new menu, click Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. MOHAA Reverend requires you to forward the following ports: 5500-5699. Go ahead and enter the settings shown above into the Forwarding menu.
|Index||Local IP||Internal Port||Public Interface IP||Ext Start Port||Ext End Port||Protocol||Enabled|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for MOHAA Reverend on the Ubee DDW3610 you should test to see if your ports are forwarded correctly.