Port Forwarding the Ubee EWV3200 Router for Qsee QSD2304C4-320


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Ubee EWV3200 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Ubee > EWV3200 > Qsee QSD2304C4-320

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Ubee EWV3200 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.1. <-- Don't Skip This Step!

Login to the Ubee EWV3200 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Ubee EWV3200 Router IP Address

It's ok if you don't know your Ubee EWV3200 router's internal IP address. You can find it by doing one of the following:

Login To The Ubee EWV3200 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Ubee EWV3200 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Ubee EWV3200 router. By default the IP address should be set to 192.168.1.1.

Ubee EWV3200 Screenshot 1

We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!

Please visit our Default Router Passwords page if the username and password shown above do not work for you.

How to Port Forward Qsee QSD2304C4-320 on the Ubee EWV3200


Having trouble forwarding ports on the Ubee EWV3200?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Ubee EWV3200 router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select System

  • Select Network

  • Put a check in the DHCP box.
  • Select OK.

  • Exit out to the live cameras by pressing the ESC button on the DVR.


Power Cycle the DVR

  • Remove the power cable from the back of the dvr.
  • Wait 20 seconds.
  • Plug in the power cable.


Identifying the IP address

  • Press Menu
  • Select Info
  • Select Network

  • Write down the IP address, subnet mask & gateway found on your info network screen.



Assign a Static IP

  • Press Menu
  • Select System

  • Select Network

  • Remove the check from the DHCP box.
  • Input the same IP address, subnet mask & gateway - (you wrote down earlier).

  • Select ok

Ubee EWV3200 Router Port Forwarding Screenshots

Now that you are logged in to your Ubee EWV3200 router you should see the following:

Ubee EWV3200 Screenshot 2

Click the Gateway link near the top of the page.

The menu on the left should change. In this new menu, click Forwarding.

Ubee EWV3200 Screenshot 3

Forward Ports 80 on the Ubee EWV3200

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Qsee QSD2304C4-320 requires you to forward the following ports: 80,2000. Go ahead and enter the settings shown above into the Forwarding menu.

Local IP Addr Start Port End Port Protocol Enabled
192.168.1.


Forward Ports 2000 on the Ubee EWV3200

You should see another page of settings that need to be entered into one of the blank lines on your routers Forwarding page. Go ahead and enter those settings now.

Local IP Addr Start Port End Port Protocol Enabled
192.168.1.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for Qsee QSD2304C4-320 on the Ubee EWV3200 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Ubee EWV3200 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Ubee EWV3200 Router Screenshots. We have the Internets largest collection of Router Screenshots.