Port Forwarding the Ubee U10C022-Ambit Router for WinMX


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Ubee Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Ubee > U10C022-Ambit > WinMX

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Ubee U10C022-Ambit router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

192.168.0. <-- Don't Skip This Step!

Login to the Ubee U10C022-Ambit Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Ubee U10C022-Ambit Router IP Address

It's ok if you don't know your Ubee U10C022-Ambit router's internal IP address. You can find it by doing one of the following:

Login To The Ubee U10C022-Ambit Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Ubee U10C022-Ambit Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Ubee U10C022-Ambit router. By default the IP address should be set to 192.168.0.1.

Ubee U10C022-Ambit Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Ubee U10C022-Ambit Router Username is: user

The Default Ubee U10C022-Ambit Router Password is: user


Click the Ok button to log in to your Ubee U10C022-Ambit router.


Default Usernames and Passwords for other Ubee Routers

Please visit our Default Ubee Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Ubee U10C022-Ambit router username and password, use our How to Reset a Router Password guide to set your Ubee U10C022-Ambit router back to its factory settings.


How to Port Forward WinMX on the Ubee U10C022-Ambit


Having trouble forwarding ports on the Ubee U10C022-Ambit?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Ubee U10C022-Ambit router to save you time and hassle.

Before we can forward ports for WinMX, we need to figure out what ports WinMX is using. Here is a brief walkthrough on how to do that. Go ahead and open up WinMX.

Click the Settings button in the menu at the top of your screen.

Under Internet Connection click the Incomming TCP Connections link. You should see a Listen on Port box. The port in that box is the one that needs to be forwarded to your computer. Please enter a port into that box. It doesn't matter what port number you choose, but a port number between 10000 and 60000 would be a good idea. Higher numbered ports are generally not blocked by ISPs. Please enter the port you chose for the Listen on Port box into the box below.

WinMX's port for incoming TCP connections

Once again in the Internet Connection section we are going to click a link. This time click the In/Out UDP Packets link. You should see an Send and receive UDP datagrams on port box. This is the port that you need to forward for your UDP connections. Once again pick a random port between 10000 and 60000, and enter it into that box. Please enter the port you chose for the Send and receive UDP datagrams on port box into the box below.

WinMX's port for incoming UDP connections

Ubee U10C022-Ambit Router Port Forwarding Screenshots

Now that you are logged in to your Ubee U10C022-Ambit router you should see the following:

Ubee U10C022-Ambit Screenshot 2

Click the Gateway link near the top of the page.

The menu on the left should change. In this new menu, click Forwarding.

Ubee U10C022-Ambit Screenshot 3

Forward User Defined Port on the Ubee U10C022-Ambit

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. WinMX requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Forwarding menu and then click Apply.

Index Local IP Internal
Port
Public Interface IP Ext Start
Port
Ext End
Port
Protocol Enabled
1. 192.168.0.


Forward User Defined Port on the Ubee U10C022-Ambit

You should see another page of settings that need to be entered into one of the blank lines on your routers Forwarding page. Go ahead and enter those settings and then click Apply.

Index Local IP Internal
Port
Public Interface IP Ext Start
Port
Ext End
Port
Protocol Enabled
2. 192.168.0.

And that is it! You are done!


Test if Your Ports are Open

Now that you have forwarded ports for WinMX on the Ubee U10C022-Ambit you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Ubee U10C022-Ambit Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Ubee Router Screenshots. We have the Internets largest collection of Router Screenshots.