To setup port forwarding on the Virata DSL906EU-WebCom router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Virata DSL906EU-WebCom router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Virata DSL906EU-WebCom router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Virata DSL906EU-WebCom router to save you time and hassle.
Now that you are logged in to your Virata DSL906EU-WebCom router you should see the following:
Click the NAT inbound link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. PS3 WWE SmackDown vs. RAW 2008 requires you to forward the 5223,3478,3479,3658 ports. Go ahead and enter the settings shown above into the NAT inboundrule menu and then click Create.
You should see another page of settings that need to be entered into one of the blank lines on your routers NAT inboundrule page. Go ahead and enter those settings and then click Create.
When you're finished, click Save config near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for PS3 WWE SmackDown vs. RAW 2008 on the Virata DSL906EU-WebCom you should test to see if your ports are forwarded correctly.