To setup port forwarding on the VisionNet 200ES-RADSL router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your VisionNet 200ES-RADSL router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your VisionNet 200ES-RADSL router. By default the IP address should be set to 10.0.0.2.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your VisionNet 200ES-RADSL router.
Please visit our Default VisionNet Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your VisionNet 200ES-RADSL router username and password, use our How to Reset a Router Password guide to set your VisionNet 200ES-RADSL router back to its factory settings.
Now that you are logged in to your VisionNet 200ES-RADSL router you should see the following:
Click the Virtual Server link near the left of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Remotely Possible Server requires you to forward the 799 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Add This Setting.
|ID||Public Port||Private Port||Port Type||Host IP Address|
When you're finished, click Save Setting near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Remotely Possible Server on the VisionNet 200ES-RADSL you should test to see if your ports are forwarded correctly.