To setup port forwarding on the Web Excel WebExceladsl2-2 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Web Excel WebExceladsl2-2 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Web Excel WebExceladsl2-2 router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Log In button to log in to your Web Excel WebExceladsl2-2 router.
Please visit our Default Web Excel Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Web Excel WebExceladsl2-2 router username and password, use our How to Reset a Router Password guide to set your Web Excel WebExceladsl2-2 router back to its factory settings.
Now that you are logged in to your Web Excel WebExceladsl2-2 router you should see the following:
Click the Advanced button near the top of the page.
The menu on the left should change. In this new menu, click Port Forwarding.
Click the Custom Port Forwarding link.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Lorex LH320 requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Custom Port Forwarding menu and then click Apply.
|Source IP Address:||Source Netmask:|
|Destination IP Address:||Destination Netmask:|
|Destination Port Start:||Destination Port End:|
|Destination Port Map:|
Use the LAN IP box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.
Put a dot into the User radio button.
Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.
When you are finished, click the Apply button.
When you're finished, click Save All near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Lorex LH320 on the Web Excel WebExceladsl2-2 you should test to see if your ports are forwarded correctly.