If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
To setup port forwarding on the Westell A90-750015-07 router your computer needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Westell A90-750015-07 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Westell A90-750015-07 router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Westell A90-750015-07 router.
Please visit our Default Westell Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Westell A90-750015-07 router username and password, use our How to Reset a Router Password guide to set your Westell A90-750015-07 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Westell A90-750015-07 router to save you time and hassle.
Now that you are logged in to your Westell A90-750015-07 router you should see the following:
Click the Firewall Settings button near the top of the page.
Click the Port Forwarding link near the left of the page.
Click the Add link near the bottom of the page.
Select Custom Defined Service from the Select an Existing Service / Rule drop down box.
Click the Create button.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Saints Row requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Create Port Forwarding Service menu and then click Apply.
| 1. Enter a name for the custom service: | ||||||||||||
| 2. Specify the port forwarding entry based on your specific ports: | ||||||||||||
| Port Forwarding Port Triggering | ||||||||||||
| 3. Define the first rule: | ||||||||||||
|
Select the service you created from the Select a Service / Rule drop down box.
Put a dot into the Host radio button.
Select your PC from the Select a Discovered LAN Device drop down box.
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Saints Row on the Westell A90-750015-07 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Didn't find the screenshot you were looking for? Check our our Westell A90-750015-07 Router Screenshots. We have the Internets largest collection of Router Screenshots.