Port Forwarding XBOX360 UFC 2009 Undisputed on the Westell A90-750015-07

What is Port Forwarding?

View all Router Screenshots.

Home > Routers > Westell > A90-750015-07 > XBOX360 UFC 2009 Undisputed

To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.

Or you can take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!


Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to


You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is password. Click the Ok button to log in to your router.

Please visit our Default Router Passwords page if the username and password shown above did not work for you.


Click the Firewall Settings button near the top of the page.


Click the Port Forwarding link near the left of the page.


Click the Add link near the bottom of the page.


Select Custom Defined Service from the Select an Existing Service / Rule drop down box.

Click the Create button.


Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 UFC 2009 Undisputed requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Create Port Forwarding Service menu and then click Apply.

1. Enter a name for the custom service:
2. Specify the port forwarding entry based on your specific ports:
Port Forwarding     Port Triggering
3. Define the first rule:
Protocol Global PortStart Global PortEnd Base HostPort Direction Port Direction


Select the service you created from the Select a Service / Rule drop down box.

Put a dot into the Host radio button.

Select your PC from the Select a Discovered LAN Device drop down box.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

To test if your port has been properly forwarded, you can use our Port Checker tool.

Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.