To setup port forwarding on the Westell E90-610030-06 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Westell E90-610030-06 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Westell E90-610030-06 router. By default the IP address should be set to 192.168.1.254.
Click the Ok button to log in to your Westell E90-610030-06 router.
Please visit our Default Westell Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Westell E90-610030-06 router username and password, use our How to Reset a Router Password guide to set your Westell E90-610030-06 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Westell E90-610030-06 router to save you time and hassle.
Now that you are logged in to your Westell E90-610030-06 router you should see the following:
Click the Home Network button near the top of the page.
Click the NAT / Gaming button near the right of the page.
Click the Define Custom Service button near the center of the page.
Put a dot into the Port Forwarding radio button.
Click the next button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Xfire Chat requires you to forward the 25777 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click next.
|Global Port Range||-|
|Base Host Port|
Select the application you created using the Custom Services drop down box. Then click enable to enable it.
And that is it! You are done!
Now that you have forwarded ports for Xfire Chat on the Westell E90-610030-06 you should test to see if your ports are forwarded correctly.