If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Westell Westell2200Wirespeed router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Westell Westell2200Wirespeed router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Westell Westell2200Wirespeed router.
Please visit our Default Westell Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Westell Westell2200Wirespeed router username and password, use our How to Reset a Router Password guide to set your Westell Westell2200Wirespeed router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your Westell Westell2200Wirespeed router to save you time and hassle.
Reverend which is the client side of MatchWatch needs to have 5600 through 5699 using the TCP protocol forwarded. You also
need to forward port 5500 through 5599 TCP for Reverend to talk with MatchWatch.
If you have a second computer that will be playing Reverend, you should forward port 12205 UDP to that computer and enter 12205 in the front of Reverend.
For more information on MOHAA MatchWatch please visit mohworld.org.
Now that you are logged in to your Westell Westell2200Wirespeed router you should see the following:
Click the Configuration button near the top of the page.
Click the Service Configuration button.
Click the define custom service button near the bottom of the page.
Put a dot into the Port Forwarding Ranges of Ports radio button.
Click the Next button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. MOHAA Reverend requires you to forward the 5500-5699 ports. Go ahead and enter the settings shown above into the Port Range menu and then click Next then Close.
|The above name will be saved as this
|Global Port Range:||-|
|Base Host Port|
|Service Name: Name1|
|Type: Port Forwarding|
|Protocol: UDP or TCP|
|Global Port(s): 5500-5699|
|Base Host Port: 5500|
Select the application you created using the Service Name drop down box. Then click Enable to enable it.
And that is it! You are done!
Now that you have forwarded ports for MOHAA Reverend on the Westell Westell2200Wirespeed you should test to see if your ports are forwarded correctly.