To setup port forwarding on the Wise WR-5004 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Wise WR-5004 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Wise WR-5004 router. By default the IP address should be set to 192.168.1.254.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Wise WR-5004 router.
Please visit our Default Wise Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Wise WR-5004 router username and password, use our How to Reset a Router Password guide to set your Wise WR-5004 router back to its factory settings.
Now that you are logged in to your Wise WR-5004 router you should see the following:
Click the NAT link near the top of the page.
The menu on the left should change. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Darwiniaplus requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Virtual Server menu.
|Private IP||Private Port||Type||Public Port||Comment||Enabled|
When you're finished, click Ok near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Darwiniaplus on the Wise WR-5004 you should test to see if your ports are forwarded correctly.