To setup port forwarding on the X-Micro Wlan802.11b router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your X-Micro Wlan802.11b router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your X-Micro Wlan802.11b router. By default the IP address should be set to 192.168.1.254.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your X-Micro Wlan802.11b router to save you time and hassle.
Now that you are logged in to your X-Micro Wlan802.11b router you should see the following:
Click the Firewall link near the left of the page.
You should now see a new menu. In this new menu, click Port Forwarding.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Point-to-Point Tunneling Protocol requires you to forward the 1723 ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Apply Changes.
|Enable Port Forwarding|
|IP Address||Protocol||Port Range: -||Comment:|
And that is it! You are done!
Now that you have forwarded ports for Point-to-Point Tunneling Protocol on the X-Micro Wlan802.11b you should test to see if your ports are forwarded correctly.