To setup port forwarding on the X-Micro XWL-11GRIX router your computer needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your X-Micro XWL-11GRIX router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your X-Micro XWL-11GRIX router. By default the IP address should be set to 192.168.62.1.
Click the Ok button to log in to your X-Micro XWL-11GRIX router.
Please visit our Default X-Micro Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your X-Micro XWL-11GRIX router username and password, use our How to Reset a Router Password guide to set your X-Micro XWL-11GRIX router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your X-Micro XWL-11GRIX router to save you time and hassle.
Now that you are logged in to your X-Micro XWL-11GRIX router you should see the following:
Click the Advanced Setup link near the left of the page.
Click the Filters link near the top of the page.
This page lets you block traffic into and out of your router. We need to make sure that the ports you are forwarding are not shown on this page. Remember, I am showing you how to use the page so you can remove the ports you are forwarding from it. Your port forwarding configuration will not work if the ports you are forwarding are on this page. Make sure that a port range here does not contain the ports you are forwarding. I'm going to go over the boxes on this page. The Filtering Layer drop down box will generally be set to Port Filtering to filter ports. The Proto Num box will be grayed out, so we will not do anything with it. The Direction drop down allows you to select traffic coming into or going out of your network. The Private Port Range box will let you enter the ports to block. The lowest port number in the range should go into the box on the left. The highest port number in the range should go into the box on the right. If you only plan on blocking one port enter that port number into both of these boxes. Use the Protocol drop down box to select the port protocol of the blocked ports.
Click the Virtual Servers link near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Mr. Driller Online requires you to forward the following ports: 3074. Go ahead and enter the settings shown above into the Virtual Servers menu.
|Service||Public IP Address||Public Port||Private Port||Protocol||Private IP Address|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Mr. Driller Online on the X-Micro XWL-11GRIX you should test to see if your ports are forwarded correctly.