If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.
Click the File button near the top of the page.
You should now see a new menu. In this new menu, click Configure.
Click the Virtual Server button near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Battlestations - Midway requires you to forward the UDP(1042,2302,6500) ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Down Arrow.
| By Port Number | |||
| Single | Range | Port Type | TCP UDP |
| To | |||
You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Down Arrow.
| By Port Number | |||
| Single | Range | Port Type | TCP UDP |
| To | |||
You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Server page. Go ahead and enter those settings and then click Down Arrow.
| By Port Number | |||
| Single | Range | Port Type | TCP UDP |
| To | |||
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Battlestations - Midway on the X-linx MB-100S you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Didn't find the screenshot you were looking for? Check our our Router Screenshots. We have the Internets largest collection of Router Screenshots.