To setup port forwarding on the Xavi 7868r router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Xavi 7868r router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Xavi 7868r router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Ok button to log in to your Xavi 7868r router.
Please visit our Default Xavi Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Xavi 7868r router username and password, use our How to Reset a Router Password guide to set your Xavi 7868r router back to its factory settings.
Now that you are logged in to your Xavi 7868r router you should see the following:
Click the Configuration link near the left of the page.
You should now see a new menu. In this new menu, click Security.
Click the Advanced NAT Configuration link near the center of the page.
Click the Add Reserved Mapping link near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Dead Rising requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Add Reserved Mapping menu and then click Add Reserved Mapping.
|IP Addresses||Transport||External Port Range||Internal Port Range|
When you're finished, click Save config near the left of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Dead Rising on the Xavi 7868r you should test to see if your ports are forwarded correctly.