If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.
You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.[an error occurred while processing this directive]
To setup port forwarding on the ZTE ZXV10-W300 router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your ZTE ZXV10-W300 router's internal IP address. You can find it by doing one of the following:
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your ZTE ZXV10-W300 router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Login button to log in to your ZTE ZXV10-W300 router.
Please visit our Default ZTE Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your ZTE ZXV10-W300 router username and password, use our How to Reset a Router Password guide to set your ZTE ZXV10-W300 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Most ISPs block the default port that Azureus uses. So it is a good idea to change Azureus' port number to something other than the default port. Here's a brief walkthrough on how to do that.
In Azureus click Tools in the menu at the top of your screen. Then click the Options link in the menu that drops down.
In the menu tree on the left hand side of this window Connection should be selected. Pick a random port between 49152 and 65535. Then enter that port into the Incomming TCP/UDP Listen Port box. When you are done, be sure to click the Save button at the bottom of the configuation screen.
Please enter the port you chose for Azureus below.
Now that you are logged in to your ZTE ZXV10-W300 router you should see the following:
Click the Advanced button near the top of the page.
Click the Port Forwarding link near the left of the page.
Put a dot into the User radio button.
Click the New button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Azureus requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Rule Management menu and then click Submit.
|Port Start:||Port End:|
You should see another page of settings that need to be entered into one of the blank lines on your routers Rule Management page. Go ahead and enter those settings and then click Submit.
|Port Start:||Port End:|
Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.
When you're finished, click Save near the top of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Azureus on the ZTE ZXV10-W300 you should test to see if your ports are forwarded correctly.