To setup port forwarding on the ZTE ZXV10-W300 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your ZTE ZXV10-W300 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your ZTE ZXV10-W300 router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
Click the Login button to log in to your ZTE ZXV10-W300 router.
Please visit our Default ZTE Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your ZTE ZXV10-W300 router username and password, use our How to Reset a Router Password guide to set your ZTE ZXV10-W300 router back to its factory settings.
Now that you are logged in to your ZTE ZXV10-W300 router you should see the following:
Click the Advanced button near the top of the page.
Click the Port Forwarding link near the left of the page.
Put a dot into the User radio button.
Click the New button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Saints Row 3 requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Rule Management menu and then click Submit.
|Port Start:||Port End:|
Select the applications you just created in the Available Rules list, then click the Add > button to move them to the Applied Rules box.
When you're finished, click Save near the top of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Saints Row 3 on the ZTE ZXV10-W300 you should test to see if your ports are forwarded correctly.