To setup port forwarding on the Zhone 1518-A1-NA router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your Zhone 1518-A1-NA router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Zhone 1518-A1-NA router. By default the IP address should be set to 192.168.1.1.
Click the Log In button to log in to your Zhone 1518-A1-NA router.
Please visit our Default Zhone Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your Zhone 1518-A1-NA router username and password, use our How to Reset a Router Password guide to set your Zhone 1518-A1-NA router back to its factory settings.
Now that you are logged in to your Zhone 1518-A1-NA router you should see the following:
Click the Advanced link near the top of the page.
You should now see a new menu. In this new menu, click Port Forwarding.
Click the Add button near the bottom of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Rag Doll Kung Fu Server requires you to forward the following ports: 27015. Go ahead and enter the settings shown above into the Port Forwarding menu.
|Service Name :|
|Select a Service :|
|Custom Service :|
|Server IP Address :|
|External Port Start||External Port End||Protocol||Internal Port Start||Internal Port End|
And that is it! You are done!
Now that you have forwarded ports for Rag Doll Kung Fu Server on the Zhone 1518-A1-NA you should test to see if your ports are forwarded correctly.