Port Forwarding the Zoom 5350 Router for GNUnet

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View Zoom 5350 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > Zoom > 5350 > GNUnet

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the Zoom 5350 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

192.168.0. <-- Don't Skip This Step!

Login to the Zoom 5350 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your Zoom 5350 Router IP Address

It's ok if you don't know your Zoom 5350 router's internal IP address. You can find it by doing one of the following:

Login To The Zoom 5350 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

Zoom 5350 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your Zoom 5350 router. By default the IP address should be set to

Zoom 5350 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default Zoom 5350 Router Username is: admin

The Default Zoom 5350 Router Password is: admin

Click the Login button to log in to your Zoom 5350 router.

Default Usernames and Passwords for other Zoom Routers

Please visit our Default Zoom Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your Zoom 5350 router username and password, use our How to Reset a Router Password guide to set your Zoom 5350 router back to its factory settings.

How to Port Forward GNUnet on the Zoom 5350

Having trouble forwarding ports on the Zoom 5350?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Zoom 5350 Router Port Forwarding Screenshots

Now that you are logged in to your Zoom 5350 router you should see the following:

Zoom 5350 Screenshot 2

Click the Advanced link near the top of the page.

Zoom 5350 Screenshot 3

Click the Forwarding link near the left of the page.

Zoom 5350 Screenshot 4

Forward Ports 1080 on the Zoom 5350

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GNUnet requires you to forward the following ports: 1080,2086. Go ahead and enter the settings shown above into the Forwarding menu.

Local IP Adr Start Port End Port Protocol Enabled

Forward Ports 2086 on the Zoom 5350

You should see another page of settings that need to be entered into one of the blank lines on your routers Forwarding page. Go ahead and enter those settings now.

Local IP Adr Start Port End Port Protocol Enabled

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for GNUnet on the Zoom 5350 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Zoom 5350 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our Zoom 5350 Router Screenshots. We have the Internets largest collection of Router Screenshots.