To setup port forwarding on the ZyXEL P-320W router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your ZyXEL P-320W router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your ZyXEL P-320W router. By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your ZyXEL P-320W password. Enter the password now.
Click the Login button to log in to your ZyXEL P-320W router.
Please visit our Default ZyXEL Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your ZyXEL P-320W router password, use our How to Reset a Router Password guide to set your ZyXEL P-320W router back to its factory settings.
Now that you are logged in to your ZyXEL P-320W router you should see the following:
Click the Go to Advanced Mode link near the center of the page.
Click the Network link near the left of the page.
You should now see a new menu. In this new menu, click NAT.
Click the Port Forwarding button near the top of the page.
Click the Modify button near the right of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. XBOX360 Cloning Clyde requires you to forward the 3074 ports. Go ahead and enter the settings shown above into the Rule Setup menu and then click Apply.
|Server IP Address||192.168.1.|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for XBOX360 Cloning Clyde on the ZyXEL P-320W you should test to see if your ports are forwarded correctly.