Free Port Forwarding Guides & PFConfig: Forward Your Ports Automatically
The Default Port Forwarding Guide for the ZyXEL P-660HW-D1
To setup port forwarding on this router your computer needs to have a static ip address.
Try our free PF Setup Static IP Address Program which will setup a static ip address for your computer.
Or you can take a look at our Static IP Address guide to setup a static ip address.
When you are finished setting up a static ip address, please come back to this page and enter
the ip address you setup in the Static IP Address box below.
Do not skip this step!
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router.
By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your password. Enter your password now.
By default your password is 1234. Click the Login button to log in to your router.
Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Click the Network link near the left of the page.
You should now see a new menu. In this new menu, click NAT.
Click the Port Forwarding button near the top of the page.
Select User define from the Service Name drop down box.
Put a checkmark in the Active checkbox.
Enter the name of the program into the Service Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea.
If you are forwarding a single port, enter that port number into the Start Port and the End Port boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Start Port box. Then enter the highest number of that range into the End Port box.
Enter the ip address to forward these ports to into the Server IP Address box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box.
When you are finished, click the Apply button.
Click the Security link near the left of the page.
You should now see a new menu. In this new menu, click Firewall.
Remove the checkmark from the Active Firewall checkbox.
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.