To setup port forwarding on the ZyXEL Prestige650R router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your ZyXEL Prestige650R router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your ZyXEL Prestige650R router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your ZyXEL Prestige650R router.
Please visit our Default ZyXEL Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your ZyXEL Prestige650R router username and password, use our How to Reset a Router Password guide to set your ZyXEL Prestige650R router back to its factory settings.
Now that you are logged in to your ZyXEL Prestige650R router you should see the following:
Click the NAT link near the center of the page.
There should be a dot in the SUA Only setting. If this isn't the case, you can not setup port forwarding without making a major change to your network. I wouldn't advise changing this unless you know what you are doing. Alright, if there is a dot in the SUA Only setting, go ahead and click Edit Details.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Quake 4 requires you to forward the following ports: 27650. Go ahead and enter the settings shown above into the Edit SUA/NAT Server Set menu.
|Start Port No.||End Port No.||IP Address|
When you're finished, click Save near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Quake 4 on the ZyXEL Prestige650R you should test to see if your ports are forwarded correctly.