Port Forwarding the ZyXEL Prestige660HW-T3v2 Router for QSee QR424-411-3


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View ZyXEL Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > ZyXEL > Prestige660HW-T3v2 > QSee QR424-411-3

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the ZyXEL Prestige660HW-T3v2 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

Login to the ZyXEL Prestige660HW-T3v2 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your ZyXEL Prestige660HW-T3v2 Router IP Address

It's ok if you don't know your ZyXEL Prestige660HW-T3v2 router's internal IP address. You can find it by doing one of the following:

Login To The ZyXEL Prestige660HW-T3v2 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

ZyXEL Prestige660HW-T3v2 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your ZyXEL Prestige660HW-T3v2 router. By default the IP address should be set to 192.168.1.1.

ZyXEL Prestige660HW-T3v2 Screenshot 1

You should see a box prompting you for your username and password. Enter your username and password now.

The Default ZyXEL Prestige660HW-T3v2 Router Username is: admin

The Default ZyXEL Prestige660HW-T3v2 Router Password is: 1234


Click the Ok button to log in to your ZyXEL Prestige660HW-T3v2 router.


Default Usernames and Passwords for other ZyXEL Routers

Please visit our Default ZyXEL Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your ZyXEL Prestige660HW-T3v2 router username and password, use our How to Reset a Router Password guide to set your ZyXEL Prestige660HW-T3v2 router back to its factory settings.


How to Port Forward QSee QR424-411-3 on the ZyXEL Prestige660HW-T3v2


Having trouble forwarding ports on the ZyXEL Prestige660HW-T3v2?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your ZyXEL Prestige660HW-T3v2 router to save you time and hassle.

Configuring the DVR to pick up an IP address

  • Press Menu
  • Select Network
  • Make sure Type is set to DHCP

  • Select Apply
  • Select Exit
The DVR will reboot & pick up an ip address from the router.


Identifying the IP address

  • Press Menu
  • Select Network
  • Write down the ip address, subnet mask & gateway.


Assign a Static IP

  • Change Type to Static
  • Input the same ip address, subnet mask & gateway - (you wrote down earlier).

  • Select Apply
  • Select Exit
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.

ZyXEL Prestige660HW-T3v2 Router Port Forwarding Screenshots

Now that you are logged in to your ZyXEL Prestige660HW-T3v2 router you should see the following:

ZyXEL Prestige660HW-T3v2 Screenshot 2

Click the NAT link near the center of the page.

ZyXEL Prestige660HW-T3v2 Screenshot 3

There should be a dot in the SUA Only setting. If this isn't the case, you can not setup port forwarding without making a major change to your network. I wouldn't advise changing this unless you know what you are doing. Alright, if there is a dot in the SUA Only setting, go ahead and click Edit Details.

ZyXEL Prestige660HW-T3v2 Screenshot 4

Forward Ports 80 on the ZyXEL Prestige660HW-T3v2

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QR424-411-3 requires you to forward the following ports: 80,9000. Go ahead and enter the settings shown above into the Edit SUA/NAT Server Set menu.

 Start Port No.End Port No.IP Address
1


Forward Ports 9000 on the ZyXEL Prestige660HW-T3v2

You should see another page of settings that need to be entered into one of the blank lines on your routers Edit SUA/NAT Server Set page. Go ahead and enter those settings now.

 Start Port No.End Port No.IP Address
2

When you're finished, click Save near the bottom of the screen to save your changes.

And that's it! You're done!


Test if Your Ports are Open

Now that you have forwarded ports for QSee QR424-411-3 on the ZyXEL Prestige660HW-T3v2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

ZyXEL Prestige660HW-T3v2 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our ZyXEL Router Screenshots. We have the Internets largest collection of Router Screenshots.