Login To The ZyXEL Prestige960 Router Using Your Web Browser
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your ZyXEL Prestige960 router.
By default the IP address should be set to 192.168.1.1.
You should see a box prompting you for your username and password. Enter your username and password now.
The Default ZyXEL Prestige960 Router Username is: webadmin
The Default ZyXEL Prestige960 Router Password is: 1234
Click the Ok button to log in to your ZyXEL Prestige960 router.
Default Usernames and Passwords for other ZyXEL Routers
If you can't login to your router because you forgot your ZyXEL Prestige960 router username and password, use our
How to Reset a Router Password guide to set your
ZyXEL Prestige960 router back to its factory settings.
How to Port Forward QSee QR424-411-3 on the ZyXEL Prestige960
Having trouble forwarding ports on the ZyXEL Prestige960?
If you are having trouble with this guide, then perhaps PFConfig may be your solution.
PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.
Configuring the DVR to pick up an IP address
Make sure Type is set to DHCP
The DVR will reboot & pick up an ip address from the router.
Identifying the IP address
Write down the ip address, subnet mask & gateway.
Assign a Static IP
Change Type to Static
Input the same ip address, subnet mask & gateway - (you wrote down earlier).
Now you have completed the ip configuration for the dvr.
Move on to the port forwarding section . in you router.
ZyXEL Prestige960 Router Port Forwarding Screenshots
Now that you are logged in to your ZyXEL Prestige960 router you should see the following:
Click the Advanced link near the top of the page.
The menu on the left should change. In this new menu, click Forwarding.
Forward Ports 80 on the ZyXEL Prestige960
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QR424-411-3 requires
you to forward the following ports: 80,9000. Go ahead and enter the settings shown above into the Forwarding menu.
Local IP Adr
Forward Ports 9000 on the ZyXEL Prestige960
You should see another page of settings that need to be entered into one of the blank lines on your routers Forwarding page.
Go ahead and enter those settings now.
Local IP Adr
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Test if Your Ports are Open
Now that you have forwarded ports for QSee QR424-411-3 on the ZyXEL Prestige960 you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Open Port Check tool.
Our Open Port Check tool is the only online port checking tool with Guaranteed Results.