To setup port forwarding on the ZyXEL X550N router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your ZyXEL X550N router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your ZyXEL X550N router. By default the IP address should be set to 192.168.1.151.
You should see a box prompting you for your ZyXEL X550N password. Enter the password now.
Click the Login button to log in to your ZyXEL X550N router.
Please visit our Default ZyXEL Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your ZyXEL X550N router password, use our How to Reset a Router Password guide to set your ZyXEL X550N router back to its factory settings.
Now that you are logged in to your ZyXEL X550N router you should see the following:
Click the Network link near the left of the page.
You should now see a new menu. In this new menu, click NAT.
Click the Application button near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Winamp Audio Streaming requires you to forward the 8000-8001 ports. Go ahead and enter the settings shown above into the Application menu and then click Apply.
|Server IP Address|
And that is it! You are done!
Now that you have forwarded ports for Winamp Audio Streaming on the ZyXEL X550N you should test to see if your ports are forwarded correctly.