To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.

You should see a box prompting you for your password. Enter your password now. By default your password is 1234. Click the Ok button to log in to your router.

Please visit our default username and passsword page, if the password shown above did not work for you.

Click the SUA/NAT link near the left of the page.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Aleph One requires you to forward the 4226,15367 ports. Go ahead and enter the settings shown above into the SUA/NAT menu.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Aleph One requires you to forward the 4226,15367 ports. Go ahead and enter the settings shown above into the menu and then click SUA/NAT.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!