To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.1.

You should see a box prompting you for your password. Enter your password now. By default your password is 1234. Click the Ok button to log in to your router.

Click the SUA/NAT link near the left side of the page.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Total Annihilation requires you to forward the 2300-2400,47624 ports. Go ahead and enter the settings shown above into the SUA/NAT menu.

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Total Annihilation requires you to forward the 2300-2400,47624 ports. Go ahead and enter the settings shown above into the menu and then click SUA/NAT.

When you're finished, click Apply near the bottom of the screen to save your changes.

And that's it! You're done!