Port Forwarding the ZyXEL ZyWall50 Router for GNUnet


What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View ZyXEL Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > ZyXEL > ZyWall50 > GNUnet

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the ZyXEL ZyWall50 router your computer needs to have a static IP address. You should complete one of the following steps first:


Now that you have setup a Static IP Address on your computer, please enter the IP address that you assigned to your computer here:

Don't Skip This Step!

In windows click on the Start button, and then click Run. This will bring up a Run program box. In the textbox in that window type cmd (WinXP/2k/Vista/Win7) or command (Win95/98/ME). Then click the Ok button. A black msdos prompt window should be open in front of you. Type telnet 192.168.0.1 or 192.168.1.1, and then press the enter key on your keyboard.

You should prompted for your password. Enter your password now. By default the password is 1234.

Please visit our default username and passsword page, if the password shown below did not work for you.

ZyXEL ZyWall50 Screenshot 1

Type 15 at the prompt to get to the Nat options.

ZyXEL ZyWall50 Screenshot 2

Type 2 at the prompt to get to the Nat Server Sets options.

ZyXEL ZyWall50 Screenshot 3

Type 1-10 at the prompt to get to the Server Sets Configuration options.

ZyXEL ZyWall50 Screenshot 4

Forward Ports 1080 on the ZyXEL ZyWall50

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. GNUnet requires you to forward the following ports: 1080,2086. Go ahead and enter the settings shown above into the Nat Server Setup menu.

 Port #IP Address
 ---------------------
1.


Forward Ports 2086 on the ZyXEL ZyWall50

You should see another page of settings that need to be entered into one of the blank lines on your routers Nat Server Setup page. Go ahead and enter those settings now.

 Port #IP Address
 ---------------------
2.

Type enter at the prompt.

Type 99 at the prompt.


Test if Your Ports are Open

Now that you have forwarded ports for GNUnet on the ZyXEL ZyWall50 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

ZyXEL ZyWall50 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our ZyXEL Router Screenshots. We have the Internets largest collection of Router Screenshots.