To setup port forwarding on the bRoad Lanner BRL-04FXP router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your bRoad Lanner BRL-04FXP router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your bRoad Lanner BRL-04FXP router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your bRoad Lanner BRL-04FXP router.
Please visit our Default bRoad Lanner Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your bRoad Lanner BRL-04FXP router username and password, use our How to Reset a Router Password guide to set your bRoad Lanner BRL-04FXP router back to its factory settings.
Before we can forward ports for BCDC++, we need to figure out what ports BCDC++ is using. Here is a brief walkthrough on how to do that. Go ahead and open up BCDC++.
In the menu at the top of your screen click the file option. In the menu that drops down click the Settings link.
In the menu on the left hand side of the window that popped up click the Connection Settings link. You should see a TCP box and an UDP box. Enter a random port into each of these boxes. It doesn't matter what ports you choose, but a port numbers between 10000 and 60000 would be a good idea. A higher numbered port is generally the best to use, because most ISP's do not block the higher numbered ports. Please enter the port you chose for the TCP box into the box below.
Please enter the port you chose for the UDP box into the box below.
Now that you are logged in to your bRoad Lanner BRL-04FXP router you should see the following:
Click the Advanced Setup link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. BCDC++ requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Virtual Server menu.
|ID||Service Ports||Server IP||Enable|
When you're finished, click Save or Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for BCDC++ on the bRoad Lanner BRL-04FXP you should test to see if your ports are forwarded correctly.