To setup port forwarding on the bRoad Lanner BRL-04FXP router your device needs to have a static IP address. You should complete one of the following steps first:
Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your bRoad Lanner BRL-04FXP router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your bRoad Lanner BRL-04FXP router. By default the IP address should be set to 192.168.1.1.
Click the Ok button to log in to your bRoad Lanner BRL-04FXP router.
Please visit our Default bRoad Lanner Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your bRoad Lanner BRL-04FXP router username and password, use our How to Reset a Router Password guide to set your bRoad Lanner BRL-04FXP router back to its factory settings.
Now that you are logged in to your bRoad Lanner BRL-04FXP router you should see the following:
Click the Advanced Setup link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Server.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. WinTV Extend requires you to forward the following ports: 7799. Go ahead and enter the settings shown above into the Virtual Server menu.
|ID||Service Ports||Server IP||Enable|
When you're finished, click Save or Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for WinTV Extend on the bRoad Lanner BRL-04FXP you should test to see if your ports are forwarded correctly.