To setup port forwarding on the eHome EH100 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your eHome EH100 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your eHome EH100 router. By default the IP address should be set to 192.168.0.1.
Click the Ok button to log in to your eHome EH100 router.
Please visit our Default eHome Router Passwords page if the username and password shown below did not work for you.
If you can't login to your router because you forgot your eHome EH100 router username and password, use our How to Reset a Router Password guide to set your eHome EH100 router back to its factory settings.
If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your eHome EH100 router to save you time and hassle.
Now that you are logged in to your eHome EH100 router you should see the following:
Click the Advanced link near the top of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Windows 2000 Terminal Server requires you to forward the following ports: AppFullPortsListTag. Go ahead and enter the settings shown above into the Port Forwarding menu.
You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings now.
When you're finished, click Save Settings near the top of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Windows 2000 Terminal Server on the eHome EH100 you should test to see if your ports are forwarded correctly.