Port Forwarding the iiNet BoB2 Router for QSee QSC26416

What is Port Forwarding?

If you don't know what Port Forwarding is yet, you might want to start by reading our What is Port Forwarding guide.

View iiNet BoB2 Router Screenshots from our Database

You might also be interested in our huge collection of Router Screenshots where you can see every page of every router that we know of.

Home > Routers > iiNet > BoB2 > QSee QSC26416

Before Forwarding a Port Setup a Static IP Address

To setup port forwarding on the iiNet BoB2 router your device needs to have a static IP address. You should complete one of the following steps first:

Now that you have setup a Static IP Address on your device, please enter the IP address that you assigned to your device here:

10.1.1. <-- Don't Skip This Step!

Login to the iiNet BoB2 Router

Now we need to know your routers IP address. You can find it a variety of ways.

How To Find Your iiNet BoB2 Router IP Address

It's ok if you don't know your iiNet BoB2 router's internal IP address. You can find it by doing one of the following:

Login To The iiNet BoB2 Router Using Your Web Browser

Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser.

iiNet BoB2 Screenshot 0

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your iiNet BoB2 router. By default the IP address should be set to

iiNet BoB2 Screenshot 1

You should see a box prompting you for your iiNet BoB2 password. Enter the password now.

The Default iiNet BoB2 Router Password is: admin

Click the Log In button to log in to your iiNet BoB2 router.

Default Usernames and Passwords for other iiNet Routers

Please visit our Default iiNet Router Passwords page if the username and password shown below did not work for you.

If you can't login to your router because you forgot your iiNet BoB2 router password, use our How to Reset a Router Password guide to set your iiNet BoB2 router back to its factory settings.

How to Port Forward QSee QSC26416 on the iiNet BoB2

Having trouble forwarding ports on the iiNet BoB2?

If you are having trouble with this guide, then perhaps PFConfig may be your solution. PFConfig is a software tool that will automatically forward ports for your router to save you time and hassle.

Before we can forward ports to your DVR, we need to change some settings in your DVR. Press Menu on your remote control to get in to your DVR's main menu.

In main menu, move the Active Frame to the Network icon and press ENTER.

Write down the number that is in the IP, Gateway, and Mask settings. Do not change the Gateway and Mask settings. We are going to create static ip address for your DVR and use it from now on. The IP address in the picture above is The 64 portion of that ip address is called the last octet. Each octet of an ip address ranges from 1 to 254. If you have an ip address where the last octet is closer to 1 than 254, add 50 to the last octet and set the IP ADDR to that. If you have an ip address that is closer to 254 than 1, subtract 50 from that last octet and set the IP ADDR to that. Save the settings and get out of your DVR's setup. In this example the last octet was 64. So the new octet in this example would be 114, and the ip address in this example would be Do not use those values they are just an example.

You will need to restart your DVR before those settings will take effect.

Remember what you set the IP ADDR to. You will need to tell your router what IP Address to forward those ports to. Since you want to forward ports to your DVR you will need your DVR's IP address.

We've already taken care of setting up the static ip address in the guide below so you don't need to worry about that part. Just enter your DVR's static ip address that we just setup in to the box requesting your computer's ip address bellow. You won't really be forwarding ports to your computer, but you will be forwarding them to your DVR. Everything else is the same, just keep in mind that the ports will end up being forwarded to your DVR and not your computer.

iiNet BoB2 Router Port Forwarding Screenshots

Now that you are logged in to your iiNet BoB2 router you should see the following:

iiNet BoB2 Screenshot 2

Click the Advanced Settings link near the left of the page.

The menu on the left should change. In this new menu, click Port Forwarding.

iiNet BoB2 Screenshot 3

Forward Ports 80 on the iiNet BoB2

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. QSee QSC26416 requires you to forward the following ports: 80,8000. Go ahead and enter the settings shown above into the Port Forwarding menu.

  Enable Description WAN Interface Inbound Port Type Private IP Address Private Port
1 10.1.1.

Forward Ports 8000 on the iiNet BoB2

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings now.

  Enable Description WAN Interface Inbound Port Type Private IP Address Private Port
2 10.1.1.

When you're finished, click Save Settings near the top of the screen to save your changes.

And that's it! You're done!

Test if Your Ports are Open

Now that you have forwarded ports for QSee QSC26416 on the iiNet BoB2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Open Port Check tool. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

iiNet BoB2 Router Screenshot Database

Didn't find the screenshot you were looking for? Check our our iiNet BoB2 Router Screenshots. We have the Internets largest collection of Router Screenshots.