Free Help Setting up Your Router or Firewall Set up your router from home
Home Guides Reviews Store Support Forum Requests
see list of routers and firewalls below

Setting up a secure wireless network with the Billion BiPAC-7402GL





 



Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.1.254.




You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are admin. Click the Ok button to log in to your router.




Click the Configuration button near the left side of the page.

You should now see a new menu. In this new menu, click LAN.

You should now see a new menu. In this new menu, click Wireless Client Filter.




Put a dot into the Allowed radio button.

Now you need to know the MAC address of every device that you want to Allow access to. You can find the MAC address of a computer by following our MAC Address instructions. After you have found the MAC address of the computer you want to Allow, type the MAC address into the MAC Address section of your router. When you are finished, click the Apply button.

When you're finished, click Save Config to FLASH near the left side of the screen to save your changes.

And that's it! You're done!