Network Utilities

Open Ports on the D-Link DVG-1120M Router

This is the open port guide for the D-Link DVG-1120M. We also have the following related guides:

Pick the guide that most closely matches your router.

Dlink DVG-1120M routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your D-Link DVG-1120M router.
  3. Navigate to the port forwarding section.
    • Click the NAT Configuration link.
    • Click on Local Server Configuration.
    • Click the Edit button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Dlink DVG-1120M router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Dlink DVG-1120M router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.0.1

In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Dlink DVG-1120M router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Dlink DVG-1120M

You should see a box prompting you for your username and password.

  • The Default D-Link DVG-1120M Router Username is: none
  • The Default D-Link DVG-1120M Router Password is: none

Enter your username and password, and then click the Login button to log in to your Dlink DVG-1120M router.

Dlink Usernames and Passwords

If your username and password do not work then please visit our Default D-Link Router Passwords page.

If you still can't login to your router because you forgot your Dlink DVG-1120M router username and password, use our How to Reset a Router Password guide to set your Dlink DVG-1120M router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Dlink DVG-1120M

Click the NAT Configuration link near the left of the page.

You should now see a new menu. In this new menu, click Local Server Configuration.

Dlink DVG-1120M

Click the Edit button near the right of the page.

Dlink DVG-1120M

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Put a number that has not yet been in the Index box.

In the Protocol box select the protocol that you want to forward these ports over.

Enter the port to forward into the Global Port and the Local Port boxes.

You need to enter the IP address that you are forwarding ports to in the Server IP box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.

From the State dropdown box pick Enabled.

When you are done click the Save button.

Most people will never need to use this, but I'm going to explain why they have Global Port and Local Port here.

The Global Port and Local Port entries are actually rather useful. They are there so you can direct traffic at two devices on your network.

Let's say that you have two devices running Ftp servers on your network. Let's call these devices device one(192.168.0.1) and device two(192.168.0.1).

Let's also say both these ftp servers are running on port 21. Okay we setup your router to forward port 21 to device one(192.168.0.1:21).

So every external IP address request from ftp goes to device one. How do we get to the second device? Well the Global Port and Local Port entries allow us to specify another outside port to connect to our internal port 21. Lets make the additional port, port 30. We would now setup a rule in the router with the Public Port set to 30 and the Private port set to 21. The IP address in that rule would be 192.168.0.1. So when you wanted to ftp to device two you would specify port 30 in your ftp client.

The router would see these requests coming in on port 30 and forward them to (192.168.0.1:21). This would allow you to ftp to both devices.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the Dlink DVG-1120M you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink DVG-1120M Router Screenshots

We also have the Internets largest collection of Router Screenshots.