Network Utilities

D-Link WBR-2310 Router Port Forwarding Guide

This is the open port guide for the D-Link WBR-2310 v2. We also have the following related guides:

Pick the guide that most closely matches your router.

Dlink WBR-2310 v2 routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your D-Link WBR-2310 router.
  3. Navigate to the port forwarding section.
    • Click the Advanced button.
    • Click the Port Forwarding or the Virtual Server button to forward ports.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your Dlink WBR-2310 v2 router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your Dlink WBR-2310 v2 router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.0.1

In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Dlink WBR-2310 v2 router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.0.1

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

Dlink WBR-2310v2

You should see a box prompting you for your username and password.

  • The Default D-Link WBR-2310 Router Username is: admin
  • The Default D-Link WBR-2310 Router Password is: blank

Enter your username and password, and then click the Login button to log in to your Dlink WBR-2310 v2 router.

Dlink Usernames and Passwords

If your username and password do not work then please visit our Default D-Link Router Passwords page.

If you still can't login to your router because you forgot your Dlink WBR-2310 v2 router username and password, use our How to Reset a Router Password guide to set your Dlink WBR-2310 v2 router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

Dlink WBR-2310v2

Click the Advanced button near the top of the page.

Dlink WBR-2310v2

This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Forwarding. To forward a single port, click Virtual Server.

Dlink WBR-2310v2 port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Forwarding a Port Range

Put a checkmark in the Enable checkbox.

Create a name for this forward and put it in the Name box. The name is only used as a reminder and has no effect on the port forward.

In the Computer Name box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.

If you are forwarding a single port, enter that port number into the Start and the End boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Start box. Then enter the highest number of that range into the End box.

From the Traffic Type box select the protocol for the ports that you want to forward.

In the Schedule dropdown box select Always.

Forwarding a Single Port

Put a checkmark in the Enable checkbox.

You need to name this entry in the Name box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.

In the Computer Name box to choose a device to forward ports to. This box contains a list of device names that are visible on your network.

Put the same port number into both the Public and the Private boxes.

Select the required protocol for these ports from the Traffic Type dropdown box.

Choose Always from the Schedule dropdown box.

When you're finished, click Save Settings near the top of the screen to save your changes.

Test if Your Ports are Open

Now that you have forwarded ports on the Dlink WBR-2310 v2 you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

Dlink WBR-2310 v2 Router Screenshots

We also have the Internets largest collection of Router Screenshots.