Jensen Scandinavia Air:Link 5000AC routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Jensen Scandinavia AirLink 5000AC router.
- Navigate to the port forwarding section.
- Click the Advanced Menu link.
- Click the Advanced Settings button.
- Click on NAT.
- Click the Port Forwarding or the Virtual Server button to forward ports.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Jensen Scandinavia Air:Link 5000AC router.
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free Static IP Setter will set up a static IP address for you.
- Another way to get a permanent IP address is to set up a DHCP reservation.
- Or, manually create a static ip address with our Static IP Guides.
This step is important because you want a permanent IP address in your device. If you do not set up a permanent IP address in your device, then when you device reboots it may get a new IP address.
Now we are going to login to your Jensen Scandinavia Air:Link 5000AC router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
Above is an example of what a web browser address bar looks like. Find the address bar in your router and type in your router's IP address.
The default Jensen Scandinavia AirLink 5000AC IP Address is: 192.168.38.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Jensen Scandinavia AirLink 5000AC Router Username is: admin
- The Default Jensen Scandinavia AirLink 5000AC Router Password is: 1234
Enter your username and password, and then click the Login button to log in to your Jensen Scandinavia Air:Link 5000AC router.
Jensen Scandinavia Usernames and Passwords
If your username and password do not work then please visit our Default Jensen Scandinavia Router Passwords page.
If you still can't login to your router because you forgot your Jensen Scandinavia Air:Link 5000AC router username and password, use our How to Reset a Router Password guide to set your Jensen Scandinavia Air:Link 5000AC router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Click the Advanced Menu link near the center of the page.
Click the Advanced Settings button near the left of the page.
The menu on the left should change. In this new menu, click NAT.
This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Forwarding. To forward a single port, click Virtual Server.
Here are the ports to forward for Xbox Live:
- TCP Ports: 3074
- UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Forwarding a Port Range
Enable the Enable Port Forwarding checkbox by putting a check in it.
Enter the IP address that you want to forward these ports to into the Private IP box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.
Use the Type dropdown box to select the protocol type of the ports you are forwarding.
If you are forwarding a range of ports, enter the lowest number of that range into the left Port Range box. Then enter the highest number of that range into the right Port Range box. If you are forwarding a single port, enter that port number into the left Port Range and the right Port Range boxes.
Make up a name to put in the Comment box. The name does not have any effect on the functionality of the forward, it's simply there so you can know why it was created.
Click the Add button when you are done.
Forwarding a Single Port
In the Enable Virtual Server checkbox put a checkmark.
Enter the same port number to be forwarded into the Private Port and the Public Port boxes.
Select the required protocol for these ports from the Type dropdown box.
You need to name this entry in the Comment box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.
Click the Add button when you are finished.
When you're finished, click Apply near the bottom of the screen to save your changes.
Test if Your Ports are Open
Now that you have forwarded ports on the Jensen Scandinavia Air:Link 5000AC you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Jensen Scandinavia Air:Link 5000AC Router Screenshots
We also have the Internets largest collection of Router Screenshots.