The incoming ports that need to be forwarded for a QNAP HS-210 NAS are:
QNAP HS-210 - PC
- TCP: 21-22, 25, 80, 443, 445, 873, 3306, 6881-6999, 8080, 9000, 13131, 55536-56559
- UDP: 6881-6999
Setting Up a Port Forward for a QNAP HS-210 NAS
You might need to forward some ports in your router when you use a QNAP HS-210 NAS. By forwarding ports you allow connection requests coming from the internet to be directed to a QNAP HS-210 NAS.
By default routers do not allow incoming network requests. By forwarding a port you can overcome this limitation.
Before You Forward a Port
Before you can forward a port you need to know the following things:
- Your router's internal IP address.
- The internal IP address of your NAS.
- Each of the TCP and UDP ports that you need to forward.
Find the IP Address of Your Router
The easiest way to locate your router's IP address is to run our free Router Detector utility. The software is part of our Network Utilities suite of tools and it is completely free to use.
Otherwise, you can follow our guide Find Your Router IP Address.
How To Forward Ports for a QNAP HS-210 NAS
We have Network Utilities software that can forward ports for you. Our Network Utilities software allows you to add port forwards and also remove them when you no longer need them to maximize your network security.
Port forwarding can also be set up step-by-step by hand. The step-by-step process for forwarding a port is:
- Begin by logging in to your router.
- Locate your routers port forwarding section.
- Put the IP address of your NAS in the proper box in your router.
- Enter the TCP and UDP ports that you need to forward for a QNAP HS-210 NAS in the corresponding boxes in your router.
Usually you have to reboot your router in order to save the changes.
You can choose your router from our list to see exactly how to forward ports for a QNAP HS-210 NAS:
List of Routers - Customized for QNAP HS-210
Those are the steps for forwarding ports in your router for a QNAP HS-210 NAS.