Here is a list of the ports that need to be forwarded for a QNAP TS-110 device:
QNAP TS-110 - PC
- TCP: 21-22, 25, 80, 443, 445, 873, 3306, 6881-6999, 8080, 9000, 13131, 55536-56559
- UDP: 6881-6999
Forward Ports for a QNAP TS-110 device
You might need to forward some ports in your router when you use a QNAP TS-110 device. Forwarding ports is used to allow incoming connection requests from the internet to a QNAP TS-110 device.
Routers are not designed to allow incoming network requests. By forwarding a port you can overcome this limitation.
Before You Forward a Port
Make sure that you know these things before forwarding a port:
- Your router's internal IP address.
- The IP address of your NAS.
- The list of the TCP and UDP ports that you need to forward.
How to Locate Your Router's IP Address
You can run our free Router Detector software to locate your router's IP address. It is part of our Network Utilities suite of tools and is free for you to use it.
Otherwise, you can follow our guide Find Your Router IP Address.
Setting Up a Port Forward for a QNAP TS-110 device
The easiest way to forward your ports is to use our Network Utilities software. Since Network Utilities allows you to both forward and un-forward ports easily you can keep your network security maximized, and then forward ports only when you need them.
Port forwarding can also be set up step-by-step by hand. The step-by-step process for forwarding a port is:
- Start by logging in to your router.
- Find the port forwarding section in your router.
- Put the IP address of your NAS in the proper box in your router.
- Put the TCP and UDP ports for a QNAP TS-110 device in the corresponding boxes in your router.
Some routers need to be rebooted in order for the changes to be saved.
You can choose your router from our list to see exactly how to forward ports for a QNAP TS-110 device:
List of Routers - Customized for QNAP TS-110
Those are the steps for forwarding ports in your router for a QNAP TS-110 device.