The following ports need to be forwarded for a QNAP TS-419P II NAS:
QNAP TS-419P II - PC
- TCP: 21-22, 25, 80, 443, 445, 873, 3306, 6881-6999, 8080, 9000, 13131, 55536-56559
- UDP: 6881-6999
Set Up a Port Forward for a QNAP TS-419P II NAS
You may need to forward ports in your router when you use a QNAP TS-419P II NAS. Forwarding ports is used to allow incoming connection requests from the internet to a QNAP TS-419P II NAS.
By default routers do not allow incoming network requests. By forwarding ports you can work around this limitation.
Remember to Do These Things Before You Forward a Port
Make sure that you know these things before forwarding a port:
- The IP address of your router.
- Your NAS's IP address.
- The list of the TCP and UDP ports that you need to forward.
How to Locate Your Router's IP Address
The easiest way to locate your router's IP address is to run our free Router Detector utility. It's a part of the Network Utilities suite of tools and it's completely free to use.
Otherwise, you can follow our guide Find Your Router IP Address.
How To Forward Ports for a QNAP TS-419P II NAS
A smart way to forward your ports is to use Network Utilities. Since Network Utilities allows you to both forward and un-forward ports easily you can keep your network security maximized, and then forward ports only when you need them.
You can also choose to set up port forwards manually. The step-by-step process for forwarding a port is:
- Log in to your router.
- Locate your routers port forwarding section.
- Put the IP address of your NAS in the proper box in your router.
- Enter the TCP and UDP ports that you need to forward for a QNAP TS-419P II NAS in the corresponding boxes in your router.
You probably will need to reboot your router for the changes to take effect.
You can choose your router from our list to see exactly how to forward ports for a QNAP TS-419P II NAS:
List of Routers - Customized for QNAP TS-419P II
That's all it takes to forward your ports for a QNAP TS-419P II NAS.