To setup port forwarding on the vividwireless DX-230 router your device needs to have a static IP address. You should complete one of the following steps first:
Now we need to know your routers IP address. You can find it a variety of ways.
It's ok if you don't know your vividwireless DX-230 router's internal IP address. You can find it by doing one of the following:
In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your vividwireless DX-230 router. By default the IP address should be set to 192.168.1.1.
We do not currently know the default username and password for your router. If you know them, please use our Comments page to let us know what they are. Thanks!Please visit our Default Router Passwords page if the username and password shown above do not work for you.
Before we can forward ports for Vuze, we need to figure out what ports Vuze is using. Here is a brief walkthrough on how to do that. Go ahead and open up Vuze.
Click Tools in the menu at the top of the program. Then click Options in the list that drops down.
In the menu on the left hand side of your screen, click Connection. On this page you should see a box called Incoming TCP / UDP listen port. You can change the port number that Vuze is using if you like. The number that is in that Port box is the port that you will have to forward.
Please enter the number that was in that box below.
Now that you are logged in to your vividwireless DX-230 router you should see the following:
Click the Networking button near the top of the page.
Click the Forwarding button near the left of the page.
Click the Insert button near the center of the page.
We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Vuze requires you to forward the ports you entered above. Go ahead and enter the settings shown above into the Forwarding menu.
|No.||Enable||Name||Protocol||WAN Port||LAN Port||Server IP|
When you're finished, click Apply near the bottom of the screen to save your changes.
And that's it! You're done!
Now that you have forwarded ports for Vuze on the vividwireless DX-230 you should test to see if your ports are forwarded correctly.