Netgear DG824M Router Open Port Instructions
Netgear DG824M routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.
The basic process to open a port is:
- Setup a static IP address on either your computer or device that you want to forward a port to.
- Login to your Netgear DG824M router.
- Navigate to the port forwarding section.
- Create a port forward entry.
While these steps might seem difficult at first, we will walk you through each step for your Netgear DG824M router.
We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.
When you use Network Utilities you get your port forwarded right now!
It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.
- Recommended - Our free program will setup a static IP address for you.
- → Download Network Utilities today!
- Or follow our Static IP Address guides to setup a static IP address.
After setting up a static ip address on your devices you need to login to your router.
Now we are going to login to your Netgear DG824M router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.
Open up your web browser and find the address bar. It should look something like this:
In the picture above the address bar has 192.168.0.1 in it. Just replace all of that with the IP address of your Netgear DG824M router. Your router's IP address can also be refered to as your computer's default gateway.
By default the IP address is set to: 192.168.0.1
After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:
You should see a box prompting you for your username and password.
- The Default Netgear DG824M Router Username is: admin
- The Default Netgear DG824M Router Password is: password
Enter your username and password, and then click the Login button to log in to your Netgear DG824M router.
Netgear Usernames and Passwords
If your username and password do not work then please visit our Default Netgear Router Passwords page.
If you still can't login to your router because you forgot your Netgear DG824M router username and password, use our How to Reset a Router Password guide to set your Netgear DG824M router back to its factory settings.
Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:
Here are the ports to forward for Xbox Live:
TCP Ports: 3074 UDP Ports: 3074
If you are looking for the ports for a different application you can find it by either:
Near the left of the page click the Services link.
Click the Add Custom Service button near the center of the page.
You need to name this entry in the Name box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.
Select the required protocol for these ports from the Type dropdown box.
If you are forwarding a range of ports separated by a hyphen then enter the lowest number of that range into the Start Port box and the highest number of that range into the Finish Port box. If you are only forwarding a single port number then enter that number into both the Start Port and the Finish Port boxes.
Near the left of the page click the Rules link.
You can click either the Outbound or Inbound Services Add button.
Pick the service you created from the Service dropdown box.
From the Action dropdown box choose ALLOW always.
You need to enter the IP address that you are forwarding ports to in the Send to LAN Server box. It's possible for this to be either the IP address of your computer or any other IP address on your network that you want ports forwarded to.
In the WAN Users dropdown box select Any.
Choose Never from the Log dropdown box.
Click the Apply button when you are all done.
Your ports should now be open. It is time to test them.
Test if Your Ports are Open
Now that you have forwarded ports on the Netgear DG824M you should test to see if your ports are forwarded correctly.
To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.
Netgear DG824M Router Screenshots
We also have the Internets largest collection of Router Screenshots.