Network Utilities

VisionNet M505N Router Open Port Instructions

VisionNet M505N routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications. This process of opening a port is frequently called a port forward, since you are forwarding a port from the internet to your home network.

The basic process to open a port is:

  1. Setup a static IP address on either your computer or device that you want to forward a port to.
  2. Login to your VisionNet M505N router.
  3. Navigate to the port forwarding section.
    • Click the Security link.
    • Click on Port Forwarding.
    • Click the Add button.
  4. Create a port forward entry.

While these steps might seem difficult at first, we will walk you through each step for your VisionNet M505N router.



We think that forwarding a port should be easy. That's why we created Network Utilities. Our software does everything that you need to forward a port.

Get Started Now!

When you use Network Utilities you get your port forwarded right now!

Step 1

It is important to setup a static ip address in the device that you are forwarding a port to. This ensures that your ports will remain open even after your device reboots.

  • Recommended - Our free program will setup a static IP address for you.
  • Or follow our Static IP Address guides to setup a static IP address.

After setting up a static ip address on your devices you need to login to your router.

Step 2

Now we are going to login to your VisionNet M505N router. Your router has a web interface, so you will login to it using your web browser. This can be either Chrome, Firefox, Internet Explorer, or Edge. It usually does not matter which browser you choose to use.

Open up your web browser and find the address bar. It should look something like this:


192.168.1.254

In the picture above the address bar has 192.168.1.254 in it. Just replace all of that with the IP address of your VisionNet M505N router. Your router's IP address can also be refered to as your computer's default gateway.

By default the IP address is set to: 192.168.1.254

After entering the IP address of your router you can simply press enter. If all goes well you will see the following screen:

VisionNet M505N

You should see a box prompting you for your username and password.

  • The Default VisionNet M505N Router Username is: enduser
  • The Default VisionNet M505N Router Password is: password

Enter your username and password, and then click the Login button to log in to your VisionNet M505N router.

VisionNet Usernames and Passwords

If your username and password do not work then please visit our Default VisionNet Router Passwords page.

If you still can't login to your router because you forgot your VisionNet M505N router username and password, use our How to Reset a Router Password guide to set your VisionNet M505N router back to its factory settings.

Step 3

Now we need to find the port forwarding section in your router. Here's how you do it. Starting from the first page in your router:

VisionNet M505N

Click the Security link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

VisionNet M505N

Click the Add button near the center of the page.

VisionNet M505N port forward

Step 4

Here are the ports to forward for Xbox Live:

TCP Ports:3074
UDP Ports:3074

If you are looking for the ports for a different application you can find it by either:

Put a dot into the Custom Service radio button.

You need to name this entry in the Custom Service box. The name does not make any difference in the forward; it's just there so that you can remember later why you setup this forward.

Enter the IP address that you want to forward these ports to into the Server IP Address box. Note that if you are forwarding ports so you can run a program on a device other than your computer then you can enter your device's IP address into that box instead.

If you are forwarding a range of ports, enter the lowest number of the range into the External Port Start and Internal Port Start boxes. Then enter the highest number of the range into the External Port End and Internal Port End boxes. If you are forwarding a single port, enter that port number into the External Port Start, External Port End, Internal Port Start and Internal Port End boxes.

From the Protocol box select the protocol for the ports that you want to forward.

After you are done click the Apply/Save button.

Your ports should now be open. It is time to test them.

Test if Your Ports are Open

Now that you have forwarded ports on the VisionNet M505N you should test to see if your ports are forwarded correctly.

To test if your port has been properly forwarded, you can use our Network Utilities tool, which includes a free Open Port Checker. Our Open Port Check tool is the only online port checking tool with Guaranteed Results.

VisionNet M505N Router Screenshots

We also have the Internets largest collection of Router Screenshots.